The TESDA course for solar installers is called PV Systems Installation NC II. The full face-to-face course is 284 hours (about 36 training days). The national assessment fee is ₱927, and if you get a TWSP scholarship slot, training and assessment are both free. In Region VIII, TESDA lists the course at the Regional Training Center in Tacloban and at PTC Southern Leyte, plus five schools in Samar. The theory modules are also free online at e-TESDA. One important limit, though: an NC II shows you can install and test a system. It is not a licence to design, sign or seal electrical plans. That stays with licensed electrical engineers under RA 7920.
Last checked 6 Nov 2026 against TESDA's list of registered programs, the T2MIS assessment-centre list, TESDA's 2025 Citizen's Charter fee table, TESDA's assessment FAQ, the e-TESDA course page, RA 7920 on Lawphil and the NWPC Region VIII wage page. Schedules, slots and fees change, so call the school before you travel.
Kung gusto mo mag-trabaho sa solar, or you just want to check your installer's crew, start here.
What PV Systems Installation NC II covers
TESDA's e-TESDA page says the qualification trains you to "perform site assessment, check PV components/materials compliance, install PV systems, and perform system testing and commissioning" (e-TESDA). Graduates are described as a PV Systems Installation Technician or PV Systems Commissioning Technician.
The four core units are:
- Perform site assessment: preparing for and doing the site visit, and filling in the installation data sheet.
- Check PV components and materials compliance: what each component does, and testing parts before they go up.
- Install the PV system: preparing, doing and finishing the installation.
- Test and commission the system: putting the system into operation, plus documentation, monitoring and maintenance.
(Module descriptions from e-TESDA.)
The original Training Regulations for PV Systems Design NC III, PV Systems Installation NC II and PV Systems Servicing NC III were approved under TESDA Board Resolution No. 2008-33 (batas.org copy). The current TR file is on TESDA's Training Regulations page.
How many hours?
Part of the course | Hours |
|---|---|
Basic competencies (communication, teamwork, professionalism, safety) | 18 |
Common competencies (materials and tools, manuals, drawings, calculations, tool care) | 72 |
Core competencies (the four PV units above) | 194 |
Total nominal duration | 284 |

Source: TR summaries at TESDA Online Program guide and GovernmentPH; the 284-hour total and 36 days also appear in the fee table of the TESDA-run Puerto Princesa School of Arts and Trades.
Who can enrol: at least 18 years old, able to communicate orally and in writing, and physically and mentally fit for training (GovernmentPH summary of the TR).
How much does it cost?
There are four ways in. Here's what each costs in fees (travel, food and photos are extra):
Path | Training fee | Assessment fee | What you get |
|---|---|---|---|
e-TESDA online modules only | ₱0 | none | Theory only. No NC II until you pass an assessment. |
TWSP scholarship slot | ₱0 | ₱0 (included) | Training, assessment, a training allowance and the NC II if you pass |
Self-pay at a TESDA school (example) | ₱2,715 | ₱927 | Same NC II if you pass |
Assessment only (you already have the skills) | none | ₱927 | NC II if you pass |

Where the numbers come from:
- ₱927 assessment fee: the "Assessment Fee per qualification" table in TESDA's 2025 Citizen's Charter lists PV Systems Installation NC II (code CONPVINC2) at ₱927.00. So do PV Systems Servicing NC III and PV System Design NC III. TESDA PTC Rosario in Cavite shows the same ₱927 and says the assessment takes about 7 hours 15 minutes (PTC Rosario). Under TESDA's FAQ, private accredited centres may only charge the Board-promulgated fee (TESDA FAQ).
- ₱2,715 training fee: this is one TESDA-run school's posted self-pay fee for the 284-hour course (Puerto Princesa SAT, Palawan). It's an example, not a Region VIII price. That page also shows an older ₱500 assessment figure; the 2025 Citizen's Charter figure is ₱927.
- Self-pay total (Solar Leyte calculation): ₱2,715 + ₱927 = ₱3,642 in fees. Ask RTC Tacloban or PTC Southern Leyte for their own current fee.
Worked example: how long it takes
Assumptions: 284 hours, 8 training hours a day, Monday to Friday.
284 ÷ 8 = 35.5, so about 36 training days, or a bit over 7 weeks. Add waiting time for a class and an assessment slot.
Can you get it free? TWSP scholarships
TESDA's Training for Work Scholarship Program (TWSP) pays for the course. In March 2026, RTC Tacloban posted a call for TWSP scholars in Solar Installation, with free training, free competency assessment and a training support allowance (as reposted by TESDA Online). That call asked for:
- age 18 or older
- high school or college graduate
- not employed, and not in school or training
- PSA birth certificate (or marriage certificate), a school record (Form 137/138, TOR or diploma), 2 passport photos and 4 one-by-one photos with white background, name tag and collared shirt, in a long brown envelope
That was one intake, and slots are limited. Ask the RTC Tacloban registrar (Brgy. 91 Abucay, Tacloban) when the next batch opens. TESDA posts its scholarship guidelines on its scholarship page.
The free online part (e-TESDA)
e-TESDA has five free modules for this qualification: an introduction, then site assessment, component compliance, installation, and testing and commissioning. They're good preparation, lalo na kung malayo ka sa Tacloban. But TESDA issues a National Certificate only after you show competence in an assessment by an accredited assessor (TESDA FAQ).
Where to train and get assessed in Region VIII
TESDA's list of institutions with registered programs, searched 6 Nov 2026, shows these PV Systems Installation NC II programs in Eastern Visayas:
School | Location | Program type |
|---|---|---|
TESDA Regional Training Center | Brgy. Abucay, Tacloban City | Regular course and Mobile Training Program |
PTC Southern Leyte | Brgy. Poblacion, Bontoc, Southern Leyte | Regular course and Mobile Training Program |
Balangiga National Agricultural School | Balangiga, Eastern Samar | Regular course and Mobile Training Program |
Balicuatro College of Arts and Trades | Allen, Northern Samar | Regular course |
East Pacific Computer College | Catarman, Northern Samar | Regular course |
Future Proof Learning Center Corp. | Catbalogan City, Samar | Regular course and Mobile Training Program |
Future Proof Learning Center Corp., Calbayog branch | Calbayog City, Samar | Regular course |
Searches for Biliran and Ormoc returned no registered PV program on the same day. For Biliran, RTC Tacloban is the nearest listed school. A Mobile Training Program means the school can bring the course to a community, so a barangay, LGU or co-op group can ask about hosting a batch.
For the assessment itself, TESDA's T2MIS assessment-centre list shows six accredited PV Systems Installation NC II centres in Region VIII: RTC Tacloban, Balicuatro College of Arts and Trades, Balangiga National Agricultural School, Primona Holy Infant Academy Inc., PTC Southern Leyte, and Future Proof Learning Center (Calbayog branch).
To apply for assessment you need a filled-in application form, three passport-size photos with your name on the back, and a completed Self-Assessment Guide (TESDA FAQ). The NC is valid for five years. When it expires you renew it, or get reassessed if TESDA has issued a new TR by then.
What an NC II lets you do, and what it doesn't
This is where many people get confused. Under RA 7920, the New Electrical Engineering Law, Section 34 says no electrical installation shall be undertaken unless the plans are "signed and sealed by a professional electrical engineer," a permit is secured, and the work is done under "the responsible charge or supervision of a professional electrical engineer, a registered electrical engineer, or a registered master electrician" (Lawphil).
So an NC II holder works on the crew. They don't sign the plans and they don't take responsible charge of the job. Our guide to choosing a solar installer explains the licence checks from the homeowner's side, and the electrical permit and CFEI guide shows where the engineer's plans fit in.
Next steps up the ladder
- TESDA: PV Systems Servicing NC III and PV System Design NC III are the next PV qualifications. The Puerto Princesa SAT table lists Servicing NC III at 158 hours.
- Registered Master Electrician (PRC): RA 7920 Section 18 lets you take the RME exam at 18 or older with one of these: 3 years of a BSEE (or a 3-year electrical engineering technology course) plus 1 year of practice; a 2-year electrician's course plus 2 years of apprenticeship; a 1-year electrician's course plus 3 years; or high school plus 5 years of apprenticeship in electrical wiring and installation. Whether a TESDA course counts as an "electrician's course" for this is up to the PRC Board of Electrical Engineering, so ask them.
What does the job pay?
We couldn't find official pay data for solar technicians in Eastern Visayas, so we won't guess. What we can tell you is the legal floor. Under Wage Order No. RB VIII-25, the daily minimum wage in Region VIII has been ₱470 for non-agriculture work and establishments with more than 10 workers, and ₱440 for retail/service establishments with 1–10 workers, since 1 June 2026. The NWPC puts these at about ₱12,259 and ₱11,477 a month (NWPC Region VIII; NWPC release). Ask any employer what they pay NC II holders compared with helpers without one.
There's real demand for the work. Our rooftop solar boom explainer covers how fast home installs are growing. Good crews also know the basics in our multimeter testing guide and roof readiness checklist.
For homeowners: how to check a crew's NC II
Ask for the worker's full name and certificate number, then search TESDA's Registry of Certified Workers, which you can search by name, certificate number or qualification (TESDA FAQ). Check that the qualification says PV Systems Installation NC II and that it was issued within the last five years. Check the engineer separately with the PRC. Our solar quote guide covers the rest of a proper quote.
FAQ
Libre ba ang TESDA solar installation course?
The e-TESDA online modules are free. The face-to-face course is free only if you get a TWSP (or similar) scholarship slot. If you pay yourself, budget for the training fee plus the ₱927 assessment fee.
How many hours is PV Systems Installation NC II?
284 hours nominal: 18 basic, 72 common and 194 core. At 8 hours a day that's about 36 training days.
Is there a TESDA solar course in Biliran?
Not in TESDA's registered-program search on 6 Nov 2026. The nearest listed school is RTC Tacloban. Ask about its Mobile Training Program if a group in your town wants a batch.
Can I install solar for clients with just an NC II?
You can work on installations, but RA 7920 requires the plans to be signed and sealed by a professional electrical engineer and the work to be under a PEE, REE or registered master electrician.
Solar Leyte is run by MACC Systems & Energy Solutions Inc., a solar installer in Naval, Biliran.
Get a free solar quote from MACC
Planning rooftop solar for a Biliran or Leyte home or business? Send a photo of your latest BILECO or LEYECO bill and we'll get back to you with a free, no-obligation written quote.
- Call/Text: 0955 723 5093
- Email: official@macc-inc.com
- Website: www.macc-inc.com
- Or use the site quote form: /quote
Sources (all checked 6 November 2026)
- TESDA Online Program, Photovoltaic Systems Installation NC II on e-TESDA: qualification description, job titles, five modules.
- TESDA, Training Regulations downloads: PV System Design NC III, PV Systems Installation NC II, PV Systems Servicing NC III.
- TESDA Board Resolution No. 2008-33 (18 Dec 2008), batas.org copy: promulgation of the PV TRs.
- TESDA Online Program guide, PV Systems Installation NC II course, and GovernmentPH, TESDA Solar Installation NC II 2026: 18 / 72 / 194 / 284 hours; entry requirements.
- Puerto Princesa School of Arts and Trades (TESDA), registered qualifications and fees: PV Systems Installation NC II 284 hrs / 36 days / ₱2,715 training and misc.; PV Systems Servicing NC III 158 hrs.
- TESDA, Citizen's Charter 2025 (First Edition): assessment fee table, CONPVINC2 PV Systems Installation NC II ₱927.00.
- TESDA PTC Rosario, Assessment Center: PV Systems Installation NC II assessment fee ₱927.00, duration 7 hours 15 minutes.
- TESDA, FAQs on Assessment and Certification: assessment requirements, promulgated fees, NC valid five years, renewal, Registry of Certified Workers.
- TESDA, Institutions with registered programs: searches "PV Systems Installation" for Leyte, Southern Leyte, Samar, Biliran, Tacloban and Ormoc, 6 Nov 2026.
- TESDA T2MIS, Assessment Center index: Region VIII, PV Systems Installation NC II, six centres, 6 Nov 2026.
- TESDA Online (tesdaonline.info), RTC Tacloban TWSP call, March 2026: scholar benefits and requirements.
- TESDA, Scholarship and Student Assistance Programs.
- Republic Act No. 7920, New Electrical Engineering Law, Lawphil: Sections 18 and 34.
- NWPC, Region VIII current minimum wage rates and RB VIII-25 release: ₱470 / ₱440 a day from 1 June 2026; ₱12,259 / ₱11,477 a month.